The blue river quilt (still?)

I haven't talked about the blue river quilt lately. You remember, the the art quilt I have been working on for a year and a half! I finished the quilting on it last February (2009) and began embellishing it.

First, I did some big stitches on the trees with pearle cotton.
























I hated it! So I ripped it out.





This is how the piece looked after quilting at the beginning of the embellishment stage, with only that one tree done, and even that one was later 'undone'. The colors here look odd, though!












Next I tried just stitching on ONE side of the trees and I liked that better.







I applied beading along the rays of the sun and various other places. This took months, as I generally only worked on this on Mondays, and not every Monday at that!













When I was trimming the quilt after the initial line of stitching to put on the binding, I accidently cut off a corner of the binding. Arrrgh!


*
*
*
*
*
*
*
*
*
*
*
*





This was supposed to be a continuous binding atround this corner, not one that starts and stops! It is NOT supposed to have two halves! So I had to rip off a big section of the binding and make a new section for that corner. Fortunately, the binding was pieced from a variety of pieces anyway, so this won't be seen as a mistake.



*
*
*
*





This is how the quilt looked in October of 2009...I was trying so hard to call it finished!

I sewed with pearle cotton...I ripped out pearle cotton.

I sewed on beads...I took off beads.

SOMETHING about it still bothered me, but I was so sick of looking at it that I just put it away and called it 'done'.

*
*
*
*
*
*
*
*
*
*



This is the lower half of the quilt...this is the area that bothered me the most. In addition to being so much lighter in color than the majority of the background, the piecing was also 'chaotic'...seams going in all directions...as opposed to neat and orderly like the seams in the upper areas of the background. Plus, the leaves and flowers in this lower area were stylistically different from the background trees. At first, I liked that, but it later began to bother me.

I had tried scattering beads along the river bank, like flotsom and jetsom, but that didn't give me the satisfaction I hoped for!

Even the cute turtle bead was later removed.




So I decided to paint the background of the lower right section! (what?)



First I used a very watered-down solution of DynaFlow to darken the light areas a bit. Better, but not enough.

I used some colored pencils and crayons to color in the quilting, to see if I might want to REALLY do some painting...with Shiva paintstiks. I decided that, NO, that wasn't the look I was after either.

By now, it is 2010, so the label on the back that says this was finished in 2009 will certainly have to be changed!









I recently decided that the way to fix this quilt was to whack off the lower part! Now, this was a difficult decision. I have never done anything like this before and was not sure whether or not I would ruin the whole thing by doing this!

But I did it. And it wasn't too bad...not too hard! I ripped some of the binding on each side then cut the quilt off where desired...then I rebound the lower edges on each side of the 'river'. Since I didn't want binding around the river itself, I undid some of the quilting in that area so I could turn under the cut edges of the quilt and the background and slipstitch them together for a clean edge. Then I reapplied the fuzzy yarn that surrounds the river edge (also by hand).

I removed the remaining pearle cotton stitches in those upper trees and added beads instead, also beading the remaining trees that were 'beadless'.

Now all trees had beads...it made more sense.


Then I decided to add beads to the water! I beaded for about an hour and (at left) is what I had:


I hated it. I was about to rip it out when I talked myself into waiting...telling myself , "Perhaps do a little more and then you'll like it."

So I did more.

I worked on this quilt for 4 days last week...or was it 5 days? It was ALOT! But I was more pleased with the overall result at this point and was trying so hard to get it finished!

Until I began beading the river, that is!
*
*
*
*
*
*
*
*
*
*



I had purchased several types of beads, since there was no pre-mixed packagesin the colors I needed at my local Hobby Lobby. I even got some sequins, just to jazz it up a bit!














*




This is where it stands today...Monday afternoon.

I am once again NOT pleased.

I think the beading on the water is NOT good....not a good thing.

I am pretty sure I liked it better without any beads on the blue water.

I am CERTAIN that I want to remove the small, 'S' shaped cluster near the bottom...but nearly as sure of removing them all.


I am forcing myself to sleep on it.

The Needlepoint Pillow

A few weeks ago I found a needlepoint pillow in a bag at the top of a closet. This was made by my grandmother and given to my daughter for her graduation...I can't remember if it was from high school or college, but either way, many years have passed since then.

While the pillow is as cute as can be, it is NOT my daughter's style. She is not the ruffle type. I am not sure DD even remembers this pillow. I decided it was silly to leave it there, in the closet, unused and unseen. I would remake it as a mixed-media piece, to become something DD would use, and give it to her for her birthday.

This is sideways...Blogger loves to rotate pictures for me, without giving me the tools to undo what it has done.

But anyway... this is the 'before'. As I said, it's cute but not her style.




I ripped the pillow apart, pulling out the stuffing, then removing the ruffle and the matching moire taffeta backing. As you can see, the corners of the canvas were cut off when this was initially made into a pillow, so I'd have to work with those.



Using 3 strands of embroidery floss, I worked a grid of X's in the darker field area. This alone gave it a more contemporary look!

I cut some triangles of my dark fabric and sewed them onto the knocked off corners, giving me a base that was square.

I placed the needlepoint on some batting which had been placed on a piece of chintz. Then I began adding fabric strips, log cabin-style, around the needlepoint. I varied the width of the strips so the needlepoint would NOT end up in the center.

Several of the fabrics used in this piece were also used on a quilt I made Aidan (my grandson, DD's son) in 2007. The already-pieced strip was a remnant from the sketchbook cover I made Andrew for Christmas. I liked the tie-ins...Kelly has told me repeatedly since Christmas that it is HER TURN to get something handmade from me. Recognizing the fabrics in this piece will remind her of the projects given to the other members of her family!

Once I got the top all put together, I was NOT thrilled with the way the piece felt. I could feel (and see) a 'ridge' created by the thick canvas under the first strip. Note to self: next time, use decorator fabrics, which are heavier, instead of quilting cottons!

Here you can see the ridge a little better...I was NOT happy!

So I decided to slash into the backing and try to reposition the batting, so it would be ABOVE the canvas edges and perhaps soften the transition.

Using my duckbilled scissors, I carefully slashed and cut the backing behind the first strips, being careful not to cross any stitching lines. The fact that the canvas corners were cut diagonally was a help in this case!

I pulled the canvas out the slashes, sort of tucking the batting and backing under the canvas edges.

But I didn't want to leave it this way. Stuffing the pillow could dislodge these edges, or they might shift during use later.

So I decide to add more batting!

I cut out the area behind the needlepoint, so it had less batting than the quilted areas, hoping to better 'level' the overall front.

I also tucked the edges of this layer of batting under the canvas edges, again, to soften the transition and eliminate that ridge.

To keep this extra batting in place, I added a layer of septic paper. This is like a non-woven interfacing, only a bit slicker. I basted this around the edges, knowing future stitching would hold it in place.

With the ridge eliminated, I could now do the decorative stitching on the front of the pillow, using both free-motion and the pre-programmed stitches on my machine.

To flatten the needlepoint area and give it some character, I stippled in the light background area around the bird and branch. This created the look of trapunto without the added stuffing!

I had planned to do a chainstitch around the circle where the dark and light blues meet, but for some (dumb) reason, I didn't do it before, when I did the grid of X's. Well, now it is much harder to get a needle through all those layers! and trying to pierce only the needlepoint, without including the batting/backing, was not fun! I also tried to smooth out the lopsided circle. Not perfect, but then, nothing I do ever is! Charm...I say.

With the front completed, I started on the back. I decided to make it 'special', too, in case DD doesn't love the front...she can flip it over! Plus, if she ever really wants to use this pillow, I wanted it to be face friendly. So I cut strips and did a stitch-n-flip application, followed by decorative stitching along the seams, using the pre-programsed stitches on my machine.

Then I trimmed the back to match the front and sewed them together around the edges, leaving an opening on the bottom edge.

I trimmed the corners and turned this right sides out, giving a good press to flatten the outside edges.

Then I stitched in the ditch around the pillow to create a flange.

Again, I stopped the stitching at the opening at the bottom.

Then I stuffed the pillow through the opening. (I probably overstuffed it...I KNOW I did!...but I am not ripping it out to redo!) Then, I pushed the stuffing away from the open edge and pinned the front to the back well inside the area to be closed. This way, I could use the sewing machine to complet the row of stitching that creates the flange...the inside row. I did have to really flatten the pillow with my hand to allow it to pass under the machine.

Yep, that's my blood you see on the flange...these pins are sharp! A little hydrogen peroxide took that right out.

Now the pillow is stuffed and enclosed, but there is still an opening in the edge of the flange.

I used needle and thead to handsew the opening closed.

The back, finished.

The front, finished.

As I said, I overstuff this...but already it has flattened some, and it will flatten more over time.

My family loves this shape of pillow...rectangles with a flange...they call these 'gripping pillows' because they are good to hug!

Ok, we're weird.

But wonderful.

Happy Birthday, Kelly!

Andrew, if you are reading…

…stop and exit now or you’ll spoil your surprise!



I made a gift for Andrew, my SIL, for Christmas this year. It had occurred to me that last year, he made a handmade gift for me. I hadn’t planned to make gifts, but decided I had better make at least ONE! So I put on my thinking cap.

Here is what I came up with:

Andrew had asked for a sketchbook. I purchased two: a large one and a small one. I decided to make a cover for the small one only.

I started by finding a picture of Andrew and taking it into Photoshop. I chose BLACK for my color sample, then, on the top toolbar, I chose FILTERS. From the Filter drop-down menu, I chose SKETCH…then PHOTOCOPY as the type of sketch. Voila! The color photo now looks like a sketch of Andrew!

I created a 'picture package' to print multiple images…I chose one that had several 2.5” x 3.5” pictures on it, as that was the size I wanted the finished block to measure. To do this, I went to the top toolbar again….to FILE, then AUTOMATE, then PICTURE PACKAGE. To print this, I cut a piece of freezer paper down to 8½ x 11” and ironed it to some muslin, and cut the muslin to be the same size. I put this into my printer and printed the picture directly on the muslin.

I don't know WHY Blogger sometimes insists on rotating my pictures! Nor can I figure out how to prevent or correct this...

I wasn’t sure how permanent this was, so I ironed it first….then got my finger wet and put a tiny bit of water on the image in the lower right corner. Sure enough, it did smear a bit! I know there is a product that can be used to make images permanent, but I don’t have any of that product right now! I dabbed it dry, ironed it again and decided I will NOT get this near water! Then I used a marker and redrew the image areas that smeared…although there were plenty of images and I didn’t plan to use that particular one.

I chose some stash fabrics and started piecing, just random colors and sizes…designing as I go. I created a pieced strip, then turned under its two long, raw edges. I placed it over a larger piece of fabric and stitched it on…using a zigzag at the top and a straight stitch at the bottom using gray thread. Then I changed to brown thread and did some more rows of stitching, zigzagging over the first row as well as doing a blanket stitch on a couple of other seams. I used a variegated thread to zigzag over the straight stitch on the lower edge of the strip.



I trimmed it roughly to size and fused some DécorBond onto the back. I put another piece of the background fabric over the DecorBond (like a sandwich).

Next I folded under about 4” at the right end, to create a pocket to slide the front cover into, then I serged around the edges. I decided to trim the corners off of what will be the flap. I cut a wide strip of fabric and folded it in half, lengthwise, stitched and turned, then pressed flat to make a large belt-loop like thing to slide the back cover under…I pinned this in place. Then I cut some strips to use as binding. I decided to piece the binding, for a more scrappy look. A bit of blanket stitching held it in place.





To make the closure, I put some wooden and copper beads onto2 or 3 strands of embroidery floss…cannot remember how many I finally was able to get through the beads! It was tricky…I ended up using a dental floss threader! Anyway, I tied knots to hold the beads in place, then used the variegated thread to zigzag over the embroidery floss to make cording. I sewed the cording in place on the flap, then sewed another bit of floss onto the flap, which I used to tie the button on. More floss and another button on the cover and Voila! The cording wraps around the buttons to keep it closed.

I wanted to add a pencil pocket on the inside, but since I was making this up as I went along, I didn’t know exactly WHERE to put it. So the pocket was created last, and sewn on by hand. Arrrgh! I did the zigzagging around the edge in variegated threads first (by machine!), then hand sewed it in place using brown thread and a blanket stitch.

Merry Christmas, y'all!