Cowl-neck Top with Cut-on Sleeves, part 2

As promised, here are a few pictures of me wearing the new cowl-neck top.

Yes, I cut off the top of my head in this one...using the timer and tripod to take pictures is always a learning experience! I decided this background was a bit too busy, too, so I moved over a little for the others.

The top performed really well in its real-life wearings! I have now worn this top several times and feel comfortable and presentable.

You might remember seeing these pants in my album over at the Wild Ginger Forum...these were made several years ago, but I pulled them out to wear since they matched this top. They have an elastic waist and inseam pockets. Made of rayon, this was a left-over Coldwater Creek fabric that was purchased from a jobber...or so I was told at the store where I bought the fabric.

Ok, yes, I was actually on the phone while taking these pictures! I use the SPEAKER function most of the time, so I don't have to hold it up by my ear...I was talking to my daughter. And yes, that IS a bandaid on my face. And, yes, my hair is lighter than before.

The sleeves are flippy and flirty and just right. They stay closed most of the time, but open with arm movement. They are not too large or long...just right. But then, I was copying a top and duplicated the sleeves on it, so I knew that in advance!

I had originally hoped the neck would drape a bit lower, but this turned out to be just fine. My necklace hangs free of the neck, and when I bend over it doesn't gap away from my body too badly. See?

All in all, this was a success! And it was fairly quick...not too many mistakes were made so I only had to rip a little.

Still basking in the glow of a sewing success, I realized I had more of this fabric left...another 1.5+ yards.
And the machines were still threaded with this color.
It only made sense to make ANOTHER turquoise slinky top!
Stay tuned...

Cowl-neck Top with Cuton sleeves

I have a RTW top that I have enjoyed wearing and decided I would try to recreate the pattern. I used PATTERNMASTER KNITS, from Wild Ginger, to draft my pattern.

After opening my saved settings for a basic top, I then selected the CUTON sleeve. It looked a little odd, but I could work with it.

Then I selected the COWL neckline. Oh dear. The front pattern reverted to 'normal' armholes while the back pattern maintained the cuton sleeve. Obviously, this is a bug that needs to be addressed.

I compared the front and back patterns of this cowl-necked pattern. When superimposed (below), I could see that the front (blue) was the same length as the back (red) from the NECKPOINT to the hem. The underarm points were at about the same depth. Hmmmm. That is NOT the relationship of my 'basic' top!

Apparently, choosing the COWL neckline eliminates the bust dart, but it reverts to the NO DART pattern, with its longer front pattern and its shorter back.

I looked at just choosing a BOATNECK instead of the cowl. Yes, both front and back had the cuton sleeve and the bust dart was still there.

Again, I flipped a pattern to superimposed front and back. As in my 'basic', the back pattern (green) is longer than the front pattern (red)from NP to hem, and the back armhole is larger than the front ah.

I knew I was going to have to redraw the sleeve and wondered how much difference there would be in fit if I just used the COWL-necked one, with its longer front and shorter back? I know this shorter upper back length makes the garment ride to the back when a sleeve is involved but this is essentially a sleeveless garment and with a heavy cowl in front, perhaps that would be a good thing? Plus, redrawing the cut-on sleeves would be easier if the front and back were the same!

I compared the two front patterns...still wondering.

After evaluating the RTW top that I was trying to recreate, I decided that its front and back were probably the same length, so I decided to go with the cowl-necked pattern, where the front and back patterns would start out identical.

I started with the BACK pattern. From measuring the RTW top, I knew I wanted my shoulder length to be 9", with the first 4.5" stitched and the remainder left as a slit. I just extended the shoulder seam at its original angle for 9" (rather than use the upward-angled sleeve extension that originally drafted.) Then I used the ARC tool to redrew the sleeve hemline from this new "shoulder" line to meet the side/underarm point.

Then I made a copy of the altered back pattern to use to create the new front.

I rotated this pattern off the center line (at hip) to add 2" width at the neckpoint level.

Then I leveled the hem by drawing a line from sideseam to center, which added a little length to the front.

I decided to also add a little extension to the BACK pattern to match!

Then I copied the COWL neckline extension from the other pattern and attached it to this new one.

After printing this pattern, I layed the RTW top onto the pattern to compare. There was a little bit of excess width between the underarm point and the waist...the sideseam needed to curve inward there, as opposed to being a straight line. So I modified my pattern and used it!

I cut this top from a 3-yard piece of turquoise slinky from my stash. This pattern with the cuton sleeve was just a bit too wide to fit the front and back pieces side by side, so there was a bit of waste in the layout. I folded and cut the front, then refolded before cutting the back to make the leftover width as large as possible so that it could be useful next time.

On the front pattern, I serge-finished all edges above about 2" below the underarm points. On the back, I serged the neck and shoulder edges. I waited to serge the sleeve hem until after the sideseam was sewn, so that I could continue down the sideseam to hem.

Although I could see no evidence of any stabilization in the back neck of the RTW, I decided to add some clear elastic to my back neck.

I used the coverstitch machine to stitch the back neckline in place. I also used it on the garment hem, but everything else was done on the sewing machine or the serger.

The shoulder and side seams were sewn on the sewing machine so they could be pressed OPEN for a few inches above and below the sleeves.

Although this wasn't how I did it initially, I had to rip and redo, so I'll draw in what I SHOULD have done! After pinning the front and back shoulders together, stitch from the dot at the neck point to the notch at the Shoulder Point. THEN fold the cowl extension over and sew again. I tried to do it all in one step but the neck edges scooted and came out uneven...so I ripped and redid.

Below, you can see how it looks with the cowl extension folded over to the back (before sewing).

The top is upside down here...with the neck and shoulder in the foreground...but hopefully you can see how it looks with the seam sewn.

I sewed the sideseams on the machine, then serged the edge of the back sleeves, continuing down the sideseams to serge them together from about about 2 inches below the underarm point all the way to the bottom edge. Above that 2" point, the sideseams are spread open to allow for the sleeves.

I used the sewing machine to turn and stitch the sleeve edges.

The color is not great in these last two...it is evening now and the skies are overcast, but using the flash just blows it out. Hopefully, you can get the idea!

I know you'd rather see it ON ME, and I will definitely add a picture when I get one! But for now, here it is on my paper-tape double, which, after my recent weight loss, is several inches larger than I am in the hips! but this is better than nothing, right?

The neck looks pretty good...

I made a critical error making this pattern though. Look at the side of cowl neck extension on the original pattern on the left.

If that extension was folded on the horizontal line, you can see that the sides of the extension (green arrows) DO NOT reach the shoulder seam! That means that the inside of the cowl acts like a 'stay'...it keeps the neckline from draping quite as much. But I WANTED the drape! This neckline is not low...I only added 2" when rotating the pattern...so I WANTED it to drape more! Plus, the RTW one that I was copying was as wide on the inside as on the outside. I didn't check that area when I made the pattern...just trusted that it would be 'right' and pasted it on!

The image on the right is how I should have adjusted the pattern...the green area. That way, when the extension is folded down, the outer edge of the extension is as large as the outer area of the neckline, allowing the neck to drape a bit lower.

Next time!

After using the coverstitch machine to hem this top, and realizing that it was SKIPPING STITCHES, I was pissed. It really didn't do a great job on the back neckline, but I didn't catch it in time to change it.

But the hem was unacceptable...it had to be ripped out!

Plus, I had allowed an inch hem allowance and that just seemed like too much. So after I ripped out the bad stitching, I trimmed off .25" all around and turned up .75" for the hem...better! I also trimmed an additional .25" at each side seam, as the hem seemed to be hanging long there. Better!

This was AFTER spending hours changing needles and adjusting settings until the coverstitch machine would finally stitch correctly.

The KEY turned out to be: 1)reducing presser foot pressure, and 2)reducing differential feed (it was set too high for this fabric after having previously adjusted it for a thicker, less stretchy knit). Changing the needles made no difference!

The front is a bit too long...remember, I chose to use the pattern where the front and back start out just the same. My 'basic' pattern would have a front that is slightly shorter than the back, and if I had started with THAT one, I bet it would have been JUST RIGHT! Next time...