Sunday, March 7, 2010

Green Blankie

My daughter still sleeps with a blankie.

She is 32 years old.

And married.

She had asked me to make her a new blankie, as her current one is looking rather tattered. In the past, the task of making her blankies has always fallen to her grandmother, but now that she is 'over 30', her request for new blankies has fallen on deaf ears (I wonder why? :) ) .

So I decided to make her one. I had made her son, my grandson, one for Christmas, but she explicitly stated that she wanted hers puffy...and would like it to NOT be heavily quilted. Tied would be nice.

Well, there is NO WAY I am gonna TIE a quilt!
Not. gonna. happen.

*
*
*

But I would QUILT one!



To make it extra puffy like she wanted, I decided to use THREE layers of batting...one layer of cotton WARM AND NATURAL sandwiched between two layers of GLORY BEE I low-loft polyester batting. While the cotton batt can have 8-10 inches between the stitching, I wasn't sure about the poly, as the label didn't say (I have had this batting in my stash for a hundred years; perhaps they didn't label them in the dark ages). Anyway, I decided 3-6" would probably be good spacing.

*
*
*


The fabric I used was intended as a quilt BACKING...it was 108" wide. That seemed perfect to me, although I have never bought this kind of fabric before. I measure off the length of the quilt and snipped the edge, then tore across the fabric. To my dismay, this fabric was so far off grain that by the time my rip reached the opposite selvedge, I had lost nearly 6"! Yikes! So I had to add a strip on one end so the blankie would be long enough...72" long was my goal.
*
*
*


I made this pillowcase-style, putting right sides together and sewing around the edges, then after adding batting, I would turn it right-side out. Well, because the fabric was so out of grain, this looked like a big mess. I ironed and pulled and blocked and ironed and pressed and sprayed and pressed some more. It was better but not straight.

Good enough.

I layered this atop the 3 layers of batting and stithced around the edges again. Then I took it to the serger and serged off the excess.


*
*
*



This is what it looked like after adding the batting, but BVEFORE turning right side out. You can see all the grain pulls. If I had this to do over, I would NOT tear the fabric across the grain, but just cut as it came off the bolt!
You can see the seam where I had to add a piece to add length. I left an opening in this seam for turning right side out so the batting could be attached to the entire perimeter.


*
*
*

Once right side out, I used the sewing machine to stitch 5/8" from the edge all the way around the blankie. This keeps the seam from rolling to the front or back and provides a finished edge look.





*
*
*
Here is the opening in the seam that was used to turn this...I stitched it closed by hand before taking this to the quilting frame.





*
*
*
*
*
*
*

I use large corsage pins to pin this blankie to the leaders on the HandiQuilter. Then I quilted a loose vine-like swirl...no leaves...trying to keep it open and well-spaced.
The quilting went very fast...well, if you don't count that I ran out of thread on the second row and had to run to the store.
*
*
*
And don't even THINK about how the second-to-last row was next to impossible to finish...the thread kept breaking.
*
*
*
*
*
*
*
*
*
I changed the needle, I changed the tension, I adjusted the HEIGHT of the frame relative to the machine bed...I don't know what finally made the difference but finally it started 'behaving' again, and the quilt was finished!
*
*
*
I mean, "blankie".
*
*
*
Actually, the official name is "foot-pocket blankie".
Most people know these as a 'quillow'...the quilt that folds up into a pocket to become a pillow.

But my daughter sleeps with one foot in her blankie...and it is NEVER folded up!

*
*
*




Now it was ready to remove the blankie from the HQ and start working on the pocket.













*
*
*

This is how it looked right off the frame...no flash. It is puffy!








*
*
*
*
*
*
*
*
*

I made the pocket accordian-style, to allow a little more ease along that upper edge. That is the weakest link...the pockets usually tear away from the blanket at the upper end. If I had thought about it ahead of time, I probably could have added some interfacing on the inside where the pocket was to attach...but I would have had to be really accurate to put it in the right place (or make the interfacing really BIG!).


*
*
*
*



The pleats on the sides of the pocket were edge-stitched before the pocket was sewn to the blankie.
I used a bar-tack to reinforce the upper edge.

My tea cup doesn't go with the blanket...it is just being used to hold the pocket open for these photos!

*
*
*
*
*
*
*
*

To wrap this gift (her birthday), I just stuck it in a brown paper bag with handles.
Then I made a gift-card/hang-tag.
I had a few other gifts to wrap also and had already put them into purchased bags....these bags had leopards on them.
You know how gift bags usually come with a little folded card on the handle?
Well, I removed one of those to use on my hang-tag for this plain bag.
I used some Heat and Bond as the base, and covered it with fabric...a scrap from her blankie, plus some scraps from my repetitive consequences quilt.
I cut the little folded-card (from the purchased bag) in half and layered it onto the card.
I sewed an eyelet in the corner and used a leather punch tool to make the hole (this was the first time I ever used that tool and it was very cool! I will use it more...).
Then I chose several colors of embroidery thread and zigzagged over them to make the cord.
A wooden bead on each end and, voila!
A hang-tag for the blankie!



Now all the gifts look like they 'go' together!


Happy Birthday, Kelly!




Saturday, March 6, 2010

Is that a UFO I see?

Why, yes, I believe that IS a UFO!

Only now it is 'finished'! yea!!!

This top was one of my experiments at creating a dartless pattern from my darted PMB block. I cut and sewed it several years ago, *almost* finishing...then stopping before doing the hems, thinking that I would wait until I bought a coverstitch machine to finish it.

I was fairly certain I was gonna buy one.

And I DID buy one.

Four years ago today.
That's right...March, 2006.

I have had my coverstitch machine for 4 years.




Yet this top has remained a UFO...hanging in a sewing room closet waiting patiently.


FINALLY this week, I pulled it out to finish it!

The cut edge of this fabric tended to roll on the cross grain, making hemming challenging. So I pinned it to my ironing board and applied some Wonder Tape. It comes on a roll...one side sticks to 'whatever', then you peel off the paper to expose the other sticky side. I applied to the cut edge, then removed the paper and folded the hem and stuck it in place. THEN I took it to the coverstitch machine and ZIP, ZAP, it was done! You can stitch through Wonder Tape...it washes out.





I also stitched around the neck edge. This was one of the main reasons I had waited to finish this top. I wanted the stitching in this area to stretch, but I didn't want to do a zigzag stitch on my regular sewing machine. The coverstitch LOOKS like a straight stitch (double), but it has some stretch so the stitches don't pop when it stretches to go over the head.



Ok, the stitches aren't perfectly straight, but that is my fault. I could count on ONE HAND (ok, maybe not) the number of times I have used this machine, so I am still acquiring skill!

:)


Cut me some slack here...









Posing for pictures is so unnatural to me! I have to take a gazillion shots to get ONE that is usable...notice, I didn't say 'good'. But apparently, posing for pictures is also an acquired skill...and one that others are struggling with also.

I had to laugh when I read this post.

While I am not posing with a vacuum cleaner, I did use one today! Does that count?

Come to think of it, after viewing this movie clip that Etta sent me (after a discussion regarding a tapeworm diet), it is a wonder I am able to go near the vacuum cleaner...

Friday, March 5, 2010

The Actual Quilting

Before I took my 'repetitive consequences' quilt to the guild meeting last week, I took some pictures of the quilt designs using NO flash. I get better images of the stitching without a flash, although the colors are somewhat less 'true'.

I tried to use organic designs...like vines and roots and rocks and flowers and peas...rocks and roots near the bottom morph into vines and leaves nearer the top. The upper area has flowers, peas, bubbles, and even one block with clouds and stars.



This is the upper left corner, going down the LEFT side.
I used a 'seaweed' type of design on a couple of these right 'warp' blocks from top to bottom.
Some of the 'weft' blocks, have viney designs regardless of whether they were nearer the ground or closer to the sky!



Vines and seaweed on the right.






A row of 'rocks' is used on the 'weft' blocks across the lower area.







---lower left corner.
Roots and rocks in red (earth?).









This is the lower RIGHT side, and the following pictures move up the right side of the quilt...basically going counter clockwise around the rectangular quilt.

Roots and rocks in blue (water?)






Moving up the right side of the quilt.
Roots become stems...rocks remain...









Right side nearer the top...water and vines and bamboo.




This is the upper RIGHT side.

I am still learning to do free-motion quilting. Sometimes the machine goes where I want it to, and sometimes it doesn't.
Ditto the camera...this one is a bit blurred!
Anyway, this is a close up view!

Wednesday, February 24, 2010

Shoulda Putta Ring On It

Hooray! Last night, my quilt was selected as one of the 8 quilts from our guild to be entered in the AQS Ultimate Guild Challenge! We had awesome participation this year...there were SEVENTEEN quilts entered!

The theme of this challenge was REPETITIVE CONSEQUENCES. The quilt had to have a repeating design element that was 'changed' in some way...shape, size, color, orientation, etc. Size requirements allowed no single side to exceed 60" but the quilt had to measure 180" around the perimeter.








I have been working on this for months and was SO excited when I finally was able to sew on the label!




However, I later found out I wasn't finished after all! But more on that later...






First, I'll talk about the design process.




Last November at the International Quilt Festival in Houston, I found a couple of fabrics in Wendy Richardson's booth that were the starting point for my quilt. One is this fabric used for the binding, as well as another one with 'dots' on it that was eventually used across the top and botton. Then as I shopped, I continued to buy fabrics that would blend with these first two.





Also in Houston, I found a Balipop (from Hoffman) in the colorway 'Spumoni' that had MANY colors in it, and I loved the way it blended with my inspiration pieces. This was a collection of batik strips that were 2.5" wide and the width of the fabric...about 44". I folded these strips and arranged them as if blocks, playing with the placement until I liked the design.

But these are only 2.5" wide. I hated the idea of cutting these beautiful fabrics up even smaller. I wanted to find a design that allowed me to use these strips as larger pieces.






I wondered if adding black might be a good idea. I put some scraps on the pieces and liked the way the black made the colors 'pop'. So my plan was solidified!




I cut two pieces from each strip and sandwiched a narrow black strip between them. This became my basic block.







Then I rotated every other block 90 degrees. This made it look like the blocks were weaving over and under each other. Perfect! The over and under of weaving is a great example of repetitive consequences!

The Balipop had 40 strips in it, and I decided that wasn't enough...I wanted MORE blocks. so I went back to the stash of fabrics I had picked up in Houston...there was a bundle of golds from WEBFabrics.com that would be perfect. Also, I went to my stash...finding a few batik scraps as well as a couple of hand-dyed pieces. This enabled me to 'grow' the quilt.

But it still needed a border. I found a piece locally that was just right. It wasn't what I went in looking for, but it ended up being better than what I thought I wanted! This batik had many colors in squiggles and circles, but was light overall.




I needed to press the seams in such a way as to NOT create bumps at the intersections. The seam allowances were pressed in opposite directions and opened at the block corners.










I added the border pieces, including a strip across the top and bottom of the original 'inspiration' fabric...the dots. This one was not included up the sides; it was supposed to be like wood frame at the top and bottom of a woven piece.




Just to continue the illusion of the weaving, I included strips of the black on the sides, curving from one row to the next.
These were not sewn down initially...just inserted into the seam between the border and the blocks.










I also inserted strips between the blocks and border at the top and bottom. At the top, I left gaps in the seam so that I could quilt the border that would be under the strips without having to dodge the strips.














I folded the black strips at the top downward to quilt the squiggly border, then inserted them into the seam gaps before quilting the top (dotted) border piece.



At the bottom the strips were just left hanging.









When it came to sewing on the binding, I had to spread it over a couple of days, because my hand began to throb! 180" inches may not seem like much, but wait until you try sewing that! Or maybe I am a wimp, because I don't do much hand sewing (or at least, I TRY not to !).










Well, a couple of days before this was to be turned in, I found out that I had NOT put enough info on my label. So rather than rip off the one I had already done, I made an additional label to cover the other one. For the guild presentation, we are supposed to cover our name anyway (so the voting will be 'blind') so this served that purpose also. Additionally, the quilt had to have a name, and I had just named mine the same as the challenge. So I created an different name and put the additonal info on this new label that is closed with a hook and eye.





The new label opens to reveal the name of our guild and the town we live in, as well as revealing the orignial label.
















This is the back of the quilt. This batik fabric came from our local JoAnn store.

















Ya know, it is so funny... Everyone who has seen this quilt comments on the rings. I put all this work into the design and construction, yet they love the rings! They were the easiest part!

The rings were also found at JoAnn Fabrics. I didn't paint them...they came this way. I just hand-sewed the black strips through the rings.













Here is a little of the quilting I did on this. I'll show more details in a future post...this one is getting quite long!


















My finished quilt, 'SHOULDA PUTTA RING ON IT'.

And, yeah, that song has been stuck in my head a lot lately!!!




To see pictures of ALL 17 of the submitted quilts, visit my album.

Saturday, February 20, 2010

Batik Class

Today, the temperature outside was wonderful...60 degrees! So what did I do? I spent the day INSIDE, in a batik class!

I didn't produce any masterpieces (that is an understatement!) but I had a good time.

In the green shirt to my right is the teacher, Phyllis Boger, holding my batik 'experiment'. I hesitate to call it an 'art piece' (LOL!) but it does have potential for use as a starting base for some future fiber art. I hate the large flowers, but the wax was on the fabric...it just 'happened'.
*
*
*
*
*
*







I used a water-soluable resist (made by Pebo) with Pebo and Dynaflow paints on this silk piece. I think it is supposed to be hung in a window...there is a small metal 'frame' around the silk (about the size of coat-hanger wire)...it came that way, ready to paint.

I really didn't know what I was about to draw/paint when I started. We were given free-rein and I was uninspired. This is what resulted...a vine.
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
This one is cotton...and we used soy wax for the resist (as opposed to parafin/beeswax). The wax was applied with a Tjanting tool...my first time to use one, and it definitely takes practice to get it right! The soy was is supposed to come out much easier...and it did iron out fairly well,, although it left a greasy kind of shadow. I think the soy wax is actually supposed to wash out, though, so I am considering washing this piece, even though the colors may fade. Hey, it's an experiment! :)

If you want to see ALL the pictures I took in this class, check out my album.

Sunday, February 14, 2010

Keep-it-together Scarf

In my stash, have a piece of burn-out velvet that I thought would make a nice scarf. I cut a piece across the width, folded it in half lengthwise, and stitched it up. Easy!

Well, when I wore it, it 'walked' all around my neck and just generally wouldn't stay in place. So when I found the instructions for the Keep-it-together Scarf, I thought that was just the ticket I needed!

I had been thumbing through some old magazines and found these instructions in the Holiday 2007 edition of SewStylish GIFTS to Make. Of course, I had to make a few changes...that is just my nature!













Cut two rectangles across the width.
Althought the instructions want you to make your pieces 9" wide, I wanted a slimmer scarf, so make mine 7". Later, when I had to sew inside a 7" circle, I could see why wider might be easier!


Next, I folded these rectangles in half lengthwise and marked a spot that was 5" from one end on both pieces. (The instructions had you mark 4.625", but I had selvedges to later remove, so I marked a bit farther.)

I sewed from the end to this mark...5"...on each of the strips. This is to creaste the 'eye' portion of the scarf.

These seam allowances were pressed open. Here again, you can understand how a WIDER scarf would be easier! It was a tight fit on my sleeve board.







One strip was turned right side out and slid inside the 'tube' of the other strip. Once the seams of each rectangle were aligned, I sewed around the end...this was a tight little circle to sew! Like making doll clothes...

Then I sewed the other two sides of the scarf, beginning each seam with the last stitch of the 'eye' seam and sewing to the other end of the scarf.

I decided I wanted my scarf a bit shorter than the full width of my fabric, so I measured and marked and cut off 2" before turning right side out.






Once the length was as desired, the end was sewn closed (don't forget to turn it right side out!).






When finished, this looks like a giant sewing needle (except with no sharp point)....long with an 'eye' at one end.
To wear, you drape the scarf around your neck and put your hand through the 'eye' to grab the other end and pull it through the eye.


Well, as luck would have it, when I put my scarf on to wear it, the nap of the velvet caused the 'eye' to creep UP the scarf, making it tighter and tighter around my neck...choking me!
So you know what I did...yep, I ripped it apart and recreated the 'eye' in the other end and closed the first eye...so that the nap would now make it creep the other direction...make it looser around my neck rather than tighter! This means I practically made this scarf TWICE! So much for a quick and easy project!
Ideally, perhaps I should have turned around ONE of the initial rectangles so that the nap of each ran in opposite directions...but I am not certain that would have keept it in place during wear! Overall, though, I think this scarf design is nice. It is especially good for when the width of the fabric is narrower (45"), such that the resulting scarf length is too skimpy to tie...because this way, there is no tie and there is only one long 'tail' hanging down!
 
Free Hit Counter